Automatic Zipper Pouch Making Machine for Stand-Up & Flat Pouches

A zipper pouch making machine converts plastic film rolls into finished, resealable pouches. For converters, brand owners, and packaging factories, it is a long-term investment. It sets your output, your pouch quality, and your running cost.

Overseas buyers usually compare several suppliers before they send an inquiry. They ask the same questions. Which pouch types can the machine make? How fast does it run? Which films work? What support follows delivery? This guide answers those questions using the real specifications of the Xinghong bag-making range, so you can shortlist a machine with confidence.

Jiangyin Xinghong Packaging Machinery Co., Ltd was founded in 2016. The company focuses on the research, development, and manufacturing of intelligent bag-making equipment. Its factory covers 10,000 square meters in Gushan Town, Jiangyin, Jiangsu, China.

High-Speed Zipper Pouch Making Machine with Servo Control

Servo control is the first feature to check. On the D600 stand-up model, servo motors drive the main drive (1 unit), the film feed (5 units), and the cutting section (2 units). Servo drives keep film tension steady and bag length accurate over long runs.

The control system supports this. The machine uses Panasonic PLC pulse control for precise bag length and low failure rate. It also offers a Xinye motion controller on an Ethernet bus. This setup computes fast, is easy to install and maintain, and can add custom functions.

Speed depends on the model. The D600 has a rated speed of 200 CPM (cuts per minute). The X600 three-side seal machine runs at 300 CPM. Real output also depends on bag size, film structure, and zipper type, so ask for a speed estimate based on your own pouch.

Zipper Pouch Making Machine for Food, Snack, Coffee & Powder Packaging

Resealable stand-up pouches are common for snacks, nuts, coffee, powders, and pet food. The zipper keeps product fresh after opening, and the flat base lets the pouch stand on the shelf. A stand up pouches machine with a zipper unit lets you produce this format in-house or for your customers.

The Xinghong website lists these bag applications: nut bags, rice bags, cat food bags, feed bags, fresh meat bags, high-temperature cooking bags, vacuum cooling bags, aluminum foil bags, and aluminum-plastic composite bags. Not every bag type needs a zipper, so confirm your pouch structure with the technical team before you order.

Fully Automatic Zipper Bag Making Machine, Stable Sealing & Accurate Cutting

Seal quality decides whether a pouch leaks. The D600 forms the pouch in clear stages. First it makes a longitudinal seal and cools it. An independent or integrated structure can be chosen. Next it fixes the zipper into the bag using ultrasonic and hot press. Then it makes the transverse seal under high pressure and low temperature.

For anystand up zipper pouch making machine, zipper fixing is the critical step. A weak zipper bond causes leaks and customer complaints. Ask every supplier how the zipper is attached and how they test it.

Cutting options include double cutting, CCD cutting, and die cutting, which are available as options. CCD is a visual positioning device. It reads the film mark and controls the cut position. This matters for printed pouches, where a small cutting error is easy to see. Auto collecting and an inspection-and-removing function finish the line. This is what makes the machine a truly automatic stand up pouch making machine rather than a semi-manual one.

One Machine for Stand-Up Zipper Pouches, Flat Zipper Pouches & 3-Side Seal Bags

Most buyers need more than one bag format over time. Xinghong builds its main models on the same control platform, with PLC control, bus control, and remote debugging. One supplier can therefore cover several formats:

•      D600: a standup bag machine for stand-up pouches (Doypack) with zipper fixing. Bag width 80–600 mm, length 80–500 mm.

•      X600: athree side sealing bag making machine for 3-side seal bags. It is a high-speed three side sealing machine with a bag width of 60–580 mm and a length of 30–600 mm.

•      H600: acenter seal bag making machine for middle-seal bags. Bag width 80–600 mm, length 80–500 mm.

The product line also covers four-side seal bags and nozzle (spouted) bags. If you need a 4 side seal bag machine or a nozzle bag machine, send your bag drawing and we will propose a matching solution. For flat zipper pouches, share the pouch drawing, zipper type, and size range. Our engineers will confirm the right configuration before quotation.

Reliable Zipper Pouch Making Machine Built for Continuous Production

Continuous production depends on film handling, build quality, and service access. Here is what Xinghong provides:

•      Film handling: double unwinding with a non-stop changing roller. A 50 m film storage for non-stop coil change is available.

•      Build quality: all key components are manufactured on the company’s own CNC machine tools.

•      Factory testing: each machine is tested in the factory before delivery.

•      Remote monitoring: the software running status of all machines can be viewed remotely.

Custom Zipper Pouch Making Machine Solutions for Packaging Manufacturers

Every converter has different pouch sizes and films, so a standard machine does not always fit. Xinghong designs to customer requirements and can design and arrange production within 45 days. Common custom options include:

•      Machine width customized to your film web.

•      Servo motor unwinding in place of standard unwinding.

•      Non-stop coil change with film storage.

•      Double cutting, CCD cutting, or die cutting.

To receive an accurate quotation quickly, send these details: bag type, width and length range, film structure and thickness, zipper type, target speed, and your local voltage and frequency. If you need a slider zipper bag making machine or a press-to-close zipper solution, state it in your inquiry so the team can confirm feasibility.

Zipper Pouch Making Machine Factory Direct: Specs, Capacity & Quotation

The table below compares the three core models. All data comes from the official product pages.

Capacity is easy to estimate. Multiply the rated CPM by 60 for the theoretical bags per hour. Actual output is lower and depends on film, bag size, and zipper type.

Many buyers search for zipper bag making machine price or zip lock bag making machine price in China. No single figure is accurate, because the price depends on the model, machine width, and options such as CCD cutting, die cutting, double cutting, and servo unwinding. Shipping destination also matters. For a reliable stand up pouch sealing machine price, send your pouch specifications and request a written quotation.

Reduce Waste and Labor with an Automatic Zipper Pouch Making Machine

Waste and labor are the biggest hidden costs in pouch production. These features address both:

•      Accurate cutting: CCD positioning helps keep cuts aligned with the print mark.

•      Stable film feed: servo film feed supports consistent tension and bag length.

•      Fewer stops: the non-stop changing roller reduces downtime at roll change.

•      Less manual handling: auto collecting and inspection-and-removing reduce operator work.

When you compare machines, ask each supplier how defective bags are detected and removed. This one question reveals a lot about build quality.

Zipper Pouch Making Machine for Small Factories and Large-Scale Production Lines

A small factory can start with one line, such as the D600 for zipper stand-up pouches or the X600 for 3-side seal bags, and add formats later. A large producer can run several lines with the same control logic. This simplifies operator training and spare parts.

All models support remote debugging, so technicians can connect to the machine and help solve problems on site. This is useful when your plant is thousands of kilometers from the factory. The range of side seal bag making machines and center seal bag making machine models also lets you expand without changing supplier.

Zipper Pouch Making Machine with Easy Operation and After-Sales Support

A good machine still needs good support. Xinghong offers video and phone service 24 hours a day, remote detection, and factory self-inspection before shipment. Remote functions let engineers connect to the machine and assist your team.

On request, the team also provides anon-site start-up and training service. To keep installation smooth, prepare the following before the technician arrives:

•      Place the machine where it will be installed.

•      Have electricity and compressed air ready beside the machine.

•      Prepare trial materials next to the machine.

•      Have operators ready for training.

•      Support the technician with visa application, airport pickup, accommodation, food, and a safe working environment.

How a Zipper Pouch Making Machine Works: Unwinding, Zipper Sealing, Cutting & Output

A stand-up zipper pouch making machine such as the D600 follows five steps:

1.     Unwinding: double unwinding with a non-stop changing roller. The film is folded in a K shape or a triangular shape.

2.     L-seal: the longitudinal seal is made and cooled.

3.     Zipper fixing: the zipper is fixed into the bag with ultrasonic and hot press.

4.     T-seal: the transverse seal is made under high pressure and low temperature.

5.     Cut and collect: double cutting, CCD cutting, or die cutting, followed by auto collecting and inspection and removing.

Printing is a separate step. A stand up pouch printing machine prints the film before it reaches the bag maker. CCD cutting then helps align the cut with the printed mark.

Zipper Pouch Making Machine Specifications: Pouch Size, Speed, Film Types & Power

Use this checklist when you request a quotation:

•      Pouch size: D600 stand-up bags are 80–600 mm wide and 80–500 mm long.

•      Speed: D600 is rated at 200 CPM. X600 is rated at 300 CPM.

•      Control: Panasonic PLC pulse control, Xinye bus control, and remote debugging.

•      Power and air: electricity and compressed air must be ready at the installation point. Send your local voltage and frequency so the quotation matches your site.

•      Film: state your film structure and thickness. See the next section.

Compatible Films for a Zipper Pouch Making Machine: PET/PE, BOPP/CPP, Kraft & More

Zipper pouches are usually made from laminated film with a heat-sealable inner layer. Buyers searching for a PE zipper bag making machine or a plastic zipper bag making machine should focus on the film first. Typical structures include:

•      PET/PE laminates.

•      BOPP/CPP laminates.

•      Aluminum foil and aluminum-plastic composite films. The Xinghong website lists both bag types.

•      Kraft paper laminates with a sealable inner layer. Confirm these with the technical team.

Film thickness, sealing layer, and zipper material all affect sealing results. Send a film sample or specification, and the team can advise on settings before you order.

Zipper Pouch Making Machine vs. Packing Machine: Which One Do You Need?

The two machines do different jobs, and buyers often confuse them.

•      Zipper pouch making machine: makes the pouch from film rolls. Choose it if you produce pouches for sale or for your own filling lines.

•      Zipper pouch packing machine: fills and seals premade pouches with your product. Choose it if you buy pouches and pack food, powder, or liquid.

Some factories need both. If you only want to cut pouch cost and control quality, start with a making machine. If you only fill products, a packing machine is the better fit. Not sure? Describe your product and daily volume, and our team can help you decide.

Zipper Pouch Making Machine FAQ: Price, Capacity, Installation & Maintenance

1. What is the price of a zipper pouch making machine?

Price depends on model, machine width, and options such as CCD cutting, die cutting, double cutting, and servo unwinding. Send your pouch specifications and destination to receive a written quotation.

2. What is the capacity of your machines?

The D600 stand-up machine is rated at 200 CPM, and the X600 three-side seal machine at 300 CPM. Multiply by 60 for theoretical bags per hour. Actual output depends on film, bag size, and zipper type.

3. Can the machine make both stand-up and flat zipper pouches?

The D600 makes stand-up pouches with zipper fixing. For flat zipper pouches, send your drawing and zipper type. Our engineers will confirm the right configuration before quotation.

4. Do you provide installation and training?

Yes. Each machine is tested in the factory before delivery. On-site start-up and training are available on request, and remote support is available for later questions.

5. Which films can I use?

Laminated films with a heat-sealable inner layer are typical, such as PET/PE and BOPP/CPP. Send a film sample or specification so the team can confirm suitability.

6. How long does customization take?

Xinghong can design and arrange production within 45 days according to customer requirements. The exact schedule depends on your configuration and will be confirmed in your quotation.

Conclusion

Choosing the right zipper pouch making machine comes down to a few clear checks: servo control, sealing and zipper fixing quality, cutting accuracy, film compatibility, and after-sales support. The D600, X600, and H600 cover stand-up, three-side seal, and center seal formats, and the team can customize width, unwinding, and cutting to your needs.

If you are comparing suppliers, we welcome your inquiry. Contact Jiangyin Xinghong Packaging Machinery Co., Ltd for product details, a quotation, customization, or technical support:

•      Email: info@djplas.com

•      WhatsApp / WeChat: +86-13815131811

•      Address: No. 7 Zhujiaba, Jianqing Village, Gushan, Jiangyin, Jiangsu, China

Send your pouch drawing, film structure, and target output, and our engineers will recommend a suitable model.